AGFA Avantra 36/44 Service Manual page 133

Avantra 36/44 Service Manual
Edit Phone File
NOTE:
After entering the customer's name, you must space over
(not tab over) to the fortieth character position and enter
the # symbol before entering the phone number.
Set Engine Phone #
Monitor Mode
This menu selection places the system in a special mode where direct entry of
modem commands can be executed. It is also used to monitor boot progress after
the imagesetter has been reset.
Execute PC Imager
NOTE:
For this function to work properly, first launch the PC
Imager program to the PC and execute (AVDIAG) from that
program's utility menu (see the PC Imager User Guide. If
you launch (AVDIAG) first, the system will not go online
when you execute the PC Imager to run copy.
This menu selection temporarily exits the AVDIAG program and starts (spawns) the
PC imager. After using AVDIAG, exit and control will return to the PC imager pro-
gram.
3-46 Diagnostics
This item enters a new phone number or
modifies an existing number located in the
AVDIAGs phone file. The phone file is a small
database of names and phone numbers used by
the AVDIAG when dialing out.
This item programs a remote modem
(imagesetter) NVRAM phone number to dial out
(ATDS1).