AGFA Avantra 36/44 Service Manual page 342

Section III: Buffer
5
3 4
1 2
Figure 1-13 The buffer's adjustable legs.
–OLP. –Adjustable leg. –Buffer.
–Imagesetter . –leg adjustment screws.
17. Secure the buffer to the imagesetter using the two (2) #10-32 x 1/4¨ sems
screws, one at each end of the buffer platen at the top corners.
The screws pass through the buffer platen from the inside and into the
threaded inserts at the back of the imagesetter. Refer to Figure 1-14.
Installation 1-15