AGFA Avantra 36/44 Service Manual page 348

4. Loosen the eight (8) adjustment screws, four (4) on each side, at the top of
the rail bearing block. Refer to Figure 1-19.
2
Figure 1-19 Buffer carriage adjustment screws.
–Adjustment screws, four on each end.
–Buffer carriage (move to the front for adjustment).
5. Straighten the carriage so that it is flush with the frame and tighten the
adjustment screws.
3
1
–Access holes in braces.
Section III: Buffer
Installation 1-21