Leveling And Attaching The Olp To The Buffer - AGFA Avantra 36/44 Service Manual

Avantra 36/44 Service Manual

1.5.4 Leveling and Attaching the OLP to the Buffer

1. For side-to-side leveling, use a spirit level across the top of the divider
walls of the developer and fixer tank.
2. For front to back leveling, use the spirit level along the top of the tank side
walls.
3. Attach the front panel. Refer to Figure 1-15.
1
5
Figure 1-15 Attaching covers and panels to the OLP.
–Front left vent cover. – Front right vent cover. –Lower rear panel.
4. Remove the block of wood and bolt (shipping hardware) from the
entrance rack assembly at the front of the OLP.
1-20 Installation
4
2
–Left side panel. –Front panel.
3