AGFA Avantra 36/44 Service Manual page 331

Avantra 36/44 Service Manual
5. Using a 7/16¨ hex wrench, remove the two (2) bolts in each of the outrig-
gers at the bottom rear of the unit. Refer to Figure 1-3.
NOTE:
Remove the outriggers at the rear of the unit only.
6. Using a 9/16¨ hex wrench, remove the two (2) bolts from the bottom left
and two (2) bolts from the bottom right of the pallet. Refer to Figure 1-3.
7. Remove the anti-static bag covering the unit.
1
2
4
Figure 1-3 Removing the rear outriggers and pallet bolts.
–Two 7/16 ¨ hex outrigger bolts. –Pallet bolts (located under unit) .
1-4 Installation
3
–Shipping strap. –Two rear outriggers.
4