About Nozzle Check Menu; Information Menu Table - MIMAKI JV150-130 Operation Manual

About NOZZLE CHECK MENU

Set operations concerning the nozzle missing detection function.

INFORMATION MENU table

Function name
Printing Check ( P.3-25)
(ON) LENGTH
Check
Interval
FILE
CLEANING
Action
RETRY
COUNT
NOZZLE RECOVERY
( P.3-25)
Judgement Condition
( P.3-25)
*1. When the set length is reached during printing, nozzle check is conducted at the start of the next printing.
*2. Depending on the print conditions, nozzle recovery is not applied in some cases.
Set value Default
ON/OFF OFF
0.1 to 50.0m 30.0 m
1 to 100 30 file
OFF/ SOFT/
SOFT
NORMAL/ HARD
0 to 3 1
ON/OFF OFF
1 to 180 1
: Press this to select INFORMATION MENU, or to switch to
the previous screen.
: Press this to switch to the next screen.
: Use these to select a setting item.
: Press this to confirm a setting, etc..
Meaning
Set this when you want to conduct nozzle check at the
beginning of online printing.
Conducts nozzle check at each set length.
Conducts nozzle check at each set number of files.
Sets the type of cleaning performed during recovery work.
Repeats the retry operation for the set number of times.
Set this when you want to conduct automatic nozzle recovery.
Sets how many missing nozzles are detected for "Nozzle
Missing" judgment to be made according to each color.
(Maximum 16 per 1 nozzle line)
Chapter 3 Nozzle Check
*1
*2
3-23
1
2
3
4
5
6