Show Ipif - D-Link xStack DGS-3620 Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
all - All of the IP interfaces.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the state for an interface:
DGS-3620-28PC:admin#disable ipif petrovic1
Command: disable ipif petrovic1
Success.
DGS-3620-28PC:admin#
46-6

show ipif

Description
This command is used to display IP interface settings.
Format
show ipif {<ipif_name 12>}
Parameters
<ipif_name 12> - (Optional) The name of the interface.
Restrictions
None.
Example
To display IP interface settings:
DGS-3620-28PC:admin# show ipif
Command: show ipif
IP Interface
VLAN Name
Interface Admin State
IPv4 Address
Proxy ARP
IP Directed Broadcast
IPv4 State
IPv6 SLAAC state
DHCPv6 Client State
DHCPv6 Client PD State
: System
: default
: Enabled
: 10.90.100.100/16 (Manual)
: Disabled (Local : Disabled)
: Disabled
: Enabled
: Disabled (Default Router: Disabled)
: Disabled (Rapid commit : Disabled)
: Disabled (Rapid commit : Disabled)
576
Primary