Reset; Show Ipif; Show Switch - D-Link DES-1210-08P Reference Manual

5 Command Line Interface
Syntax
reboot
Example
DES-1210-28> reboot
% Device will reboot, please wait a few minutes to re-login.
DES-1210-28>

reset

All configurations will be reset to the default settings.
Syntax
reset config
Example
DES-1210-28> reset config
% Device will reboot after reset configuration successfully.
DES-1210-28>

show ipif

The command displays the current IP address of the switch.
Syntax
show ipif
Example
DES-1210-28> show ipif
IP Setting Mode
IP Address
Subnet Mask
Default Gateway
DES-1210-28>

show switch

The command displays the status of the switch.
Syntax
show switch
Example
DES-1210-28> show switch
System name
System Contact
System Location
System up time
System Time
System hardware version
System firmware version
System boot version
System Protocol version
System serial number
MAC Address
DES-1210-28>
Figure 5.6 – The reboot command
Figure 5.7 – The reset config command
: Static
: 10.90.90.90
: 255.0.0.0
: 0.0.0.0
Figure 5.8 – The show ipif command
:
:
:
: 0 days, 6 hrs, 32 min, 17 secs
: 07/07/2012 06:32:19
: B1
: 3.10.003
: 1.00.008
: 2.001.004
: 1MB1733K0000A
: 00-18-E7-48-85-50
Figure 5.9 – The show switch command
88
DES-1210 Series Switch Web UI Reference Guide