D-Link xStack DGS-3620 Reference Manual page 1008

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
ports – (Optional) Specifies the list of port used for this display.
<portlist> - Enter the list of port used for this display here.
all - Specifies that all the ports will be used for this display.
Restrictions
None.
Example
To show the configured attributes of the boundary clock:
DGS-3620-28PC:admin# show ptp boundary
Command: show ptp boundary
PTP Priority1 Setting
PTP Priority2 Setting
DGS-3620-28PC:admin#
To show the configured attributes of special ports 1:1-1:4 of the boundary clock:
DGS-3620-28PC:admin# show ptp boundary ports 1:1-1:4
Command: show ptp boundary ports 1:1-1:4
The attribute configurations of the ports of boundary:
DM : Delay Mechanism
AI : Announce Interval
CART : The Coefficient of Announce Receipt Timeout
SI : Synchronization Interval
EDRI : The Exponent of Delay_Request Interval
PDRI : Pdelay_Request Interval
Port DM
1:1 P2P
1:2 E2E
1:3 P2P
1:4 P2P
DGS-3620-28PC:admin#
86-15 show ptp p2p_transparent ports
Description
This command is used to display the configured attributes of the P2P transparent clock's special
ports.
Format
show ptp p2p_transparent ports [<portlist> | all]
: 128
: 127
AI CART SI EDRI
2 3 1
1 2 0.5
2 5 1
2 6 1
PDRI State
1 8 Enabled
0 16 Enabled
2 8 Enabled
4 4 Enabled
1003