Show Bgp Dampening {[Ipv4 | Ipv6] Unicast - D-Link xStack DGS-3620 Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Network
*> 20.0.0.0/8
*> 221.221.2.0/24
*d 221.221.252.0/24
*d 221.221.253.0/24
Total Entries: 4
DGS-3620-28PC:admin#
12-18 show bgp dampening
Description
This command is used to show the BGP dampening configurations. If no parameters are specified,
dampening information for IPv4 unicast will be displayed.
Format

show bgp dampening {[ipv4 | ipv6] unicast}

Parameters
ipv4 unicast – (Optional) Specifies to show dampening parameters for the IPv4 unicast address
family.
ipv6 unicast – (Optional) Specifies to show dampening parameters for the IPv6 unicast address
family.
Restrictions
None. (EI Mode Only Command)
Example
Following example shows how to get the BGP dampening configurations:
Gateway Metric
0.0.0.0 0
0.0.0.0 0
1.1.1.2
1.1.1.2
182
LocPrf Weight Path
32768 i
32768 i
1 40 i
1 40 i