D-Link xStack DGS-3620 Reference Manual page 523

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
<ipaddr> - Enter the IPv4 address of the FTP server here.
<ipv6addr> - Enter the IPv6 address of the FTP server here.
tcp_port - (Optional) Specifies the TCP port number used for the FTP connection.
<tcp_port_number 1-65535> - Enter the TCP port number here. This value must be between
1 and 65535.
dest_file - Specifies the destination file name and path.
<path_filename 64> - Enter the destination file name and path here. This can be up to 64
characters long.
ftp: - Specifies the FTP connection details.
<string 128> - Enter the FTP connection details here. For example,
john:123456@172.18.211.41:21/image/cfg.txt.
unit - (Optional) Specifies the switch stacking unit's ID.
<unit_id> - Enter the switch stacking unit's ID here.
all - Specifies that all the switch units in the stack will be used.
Restrictions
Only Administrators and Operators can issue this command.
Examples
This example shows how to upload the attack log to an FTP server.
DGS-3620-28PC:admin# upload attack_log_toFTP 10.90.90.15 log.txt
Command: upload attack_log_toFTP 10.90.90.15 log.txt
Connecting to server................... Done.
User(Anonymous): john
Pass:******
Upload Log............................. Done.
DGS-3620-28PC:admin#
This example shows how to upload the attack log to an FTP server using a string.
DGS-3620-28PC:admin# upload attack_log_toFTP ftp:
john:123456@10.90.90.15:21/log.txt
Command: upload attack_log_toFTP ftp: john:123456@10.90.90.15:21/log.txt
Connecting to server................... Done.
Upload log............................. Done.
DGS-3620-28PC:admin#
40-4 upload cfg_toFTP
Description
This command is used to upload a configuration file from the Switch to an FTP server.
518