D-Link xStack DGS-3620 Reference Manual page 674

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable JWAC redirect:
DGS-3620-28PC:admin#disable jwac redirect
Command: disable jwac redirect
Success.
DGS-3620-28PC:admin#
53-5 enable jwac forcible_logout
Description
This command is used to enable JWAC forcible logout. When enabled, a Ping packet from an
authenticated host to the JWAC Switch with TTL=1 will be regarded as a logout request, and the
host will be moved back to unauthenticated state.
Format
enable jwac forcible_logout
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable JWAC forcible logout:
DGS-3620-28PC:admin#enable jwac forcible_logout
Command: enable jwac forcible_logout
Success.
DGS-3620-28PC:admin#
669