D-Link xStack DGS-3620 Reference Manual page 286

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
rip - To redistribute RIP routes to BGP.
ospf - To redistribute OSPF routes to BGP.
all - To redistribute both OSPF AS-internal and OSPF AS-external routes to BGP.
internal - To redistribute only the OSPF AS-internal routes.
external - To redistribute only the OSPF AS-external routes, including type-1 and type-2
routes.
type_1 - To redistribute only the OSPF AS-external type-1 routes.
type_2 - To redistribute only the OSPF AS-external type-2 routes.
inter+e1 - To redistribute only the OSPF AS-external type-1 and OSPF AS-internal routes.
inter+e2 - To redistribute only the OSPF AS-external type-2 and OSPF AS-internal routes.
metric - (Optional) Specifies the BGP metric value for the redistributed routes.
<value 0-4294967295> - Enter the metric value used here. This value must be between 0 and
4294967295.
route_map - (Optional) Specifies a route map which will be used as the criteria to determine
whether to redistribute specific routes.
<map_name 16> - Enter the route map name used here. This name can be up to 16
characters long.
no_route_map - Specifies to withdraw the route map setting.
Restrictions
Only Administrators, Operators and Power-Users can issue this command. (EI Mode Only
Command)
Example
To add route redistribution settings:
DGS-3620-28PC:admin# config route redistribute dst bgp src ospf all metric 2
Command: config route redistribute dst bgp src ospf all metric 2
Success.
DGS-3620-28PC:admin#
18-10 show route redistribute
Description
This command is used to display the route redistribution settings on the Switch.
Format
show route redistribute
Parameters
None
Restrictions
None.
281