D-Link xStack DGS-3620 Reference Manual page 275

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
config radius delete 1
config radius add 1 10.48.74.121 key dlink default
config 802.1x reauth port_based ports all
config 802.1x init port_based ports all
config 802.1x auth_mode port_based
config 802.1x auth_parameter ports 1-50 direction both
config 802.1x capability ports 1-5 authenticator
show 802.1x auth_configuration ports 1
show 802.1x auth_state ports 1-5
enable 802.1x
show 802.1x auth_state ports 1-5
show igmp_snooping
enable igmp_snooping
DGS-3620-28PC:admin#
16-3 config command_history
Description
This command is used to configure the number of commands that the switch can record. The
switch can keep records for the last 40 (maximum) commands you entered.
Format
config command_history <value 1-40>
Parameters
<value 1-40> – Specify the number of commands (1 to 40) that the switch can record. The
default value is 25.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the number of commands the switch can record to the last 20 commands:
DGS-3620-28PC:admin#config command_history 20
Command: config command_history 20
Success.
DGS-3620-28PC:admin#
270