D-Link xStack DGS-3620 Reference Manual page 1053

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Examples
This example shows how to reboot the device after 10 minutes and not to save the configuration
before doing so.
DGS-3620-28PC:admin# config reboot schedule in 10
Command: config reboot schedule in 10
Success.
DGS-3620-28PC:admin#
This example shows how to reboot the device at 1 September 2013 23:00 and save all
configurations before rebooting.
DGS-3620-28PC:admin# config reboot schedule at 23:00 01sep2013
save_before_reboot
Command: config reboot schedule at 23:00 01sep2013 save_before_reboot
Success.
DGS-3620-28PC:admin#
91-2 show reboot schedule
Description
This command is used to display the reboot schedule status.
Format
show reboot schedule
Parameters
None.
Restrictions
None.
Example
This example shows how to display the reboot schedule status.
1048