D-Link xStack DGS-3620 Reference Manual page 777

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Format
create md5 key <key_id 1-255> <password 16>
Parameters
key - Specifies that the MD5 key will be created.
<key_id 1-255> - Enter the MD5 key used here. This key must be between 1 and 255.
<password 16> - Enter an alphanumeric string of between 1 and 16, case-sensitive
characters, used to generate the Message Digest which is in turn is used to authenticate
OSPF packets within the OSPF routing domain.
Restrictions
Only Administrators and Operators can issue this command.
Example
To create an MD5 key table:
DGS-3620-28PC:admin# create md5 key 1 dlink
Command: create md5 key 1 dlink
Success.
DGS-3620-28PC:admin#
65-3 delete md5 key
Description
This command is used to delete an MD5 key table.
Format
delete md5 key <key_id 1-255>
Parameters
key - Specifies that the MD5 key will be removed.
<key_id 1-255> - Enter the MD5 key used here. This key must be between 1 and 255.
Restrictions
Only Administrators and Operators can issue this command.
Example
To delete an MD5 key table:
772