D-Link xStack DGS-3620 Reference Manual page 886

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
76-9 show ospf area
Description
This command is used to display an OSPF area's configuration.
Format
show ospf area {<area_id>}
Parameters
<area_id> - (Optional) Enter the OSPF area ID used here.
Restrictions
None.
Example
To display OSPF area's configuration:
DGS-3620-28PC:admin# show ospf area
Command: show ospf area
OSPF Area Settings
Area ID
--------------- ------ ----------------------- ----------------- ---------
0.0.0.0
1.1.1.1
4.4.4.4
5.5.5.5
Total Entries : 4
DGS-3620-28PC:admin#
76-10 create ospf host_route
Description
This command is used to create an OSPF host route.
Format
create ospf host_route <ipaddr> {area <area_id> | metric <value 1-65535>}
Parameters
<ipaddr> - Enter the host's IP address used here.
area - (Optional) Specifies a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that
uniquely identifies the OSPF area in the OSPF domain.
Type Stub Import Summary LSA Stub Default Cost Translate
Normal None
Normal None
Normal None
Stub Enabled
None
None
None
1
881
None
None
None
None