D-Link xStack DGS-3620 Reference Manual page 271

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
mepname - Specifies the MEP name.
<string 32> - Enter the MEP name. This name can be up to 32 characters long.
mepid - Specifies the MEP ID.
<int 1-8191> - Enter the MEP ID. This value must be between 1 and 8191.
md - Specifies the Maintenance Domain name.
<string 22> - Enter the Maintenance Domain name. This name can be up to 22 characters
long.
md_index - Specifies the Maintenance Domain index.
<uint 1-4294967295> - Enter the Maintenance Domain index. This value must be between 1
and 4294967295.
ma - Specifies the Maintenance Association name.
<string 22> - Enter the Maintenance Association name. This name can be up to 22
characters long.
ma_index - Specifies the Maintenance Association index.
<uint 1-4294967295> - Enter the Maintenance Association index.
Restrictions
None. (EI Mode Only Command)
Example
To display the frame delay measurement information.
DGS-3620-28PC:admin#show cfm dm mepname mep1
Command: show cfm dm mepname mep1
State
DMM Tansmitted
DMR Received
DMM Received
DMR Transmitted : 0
ID MAC Address
Time
--- ----------------- ------- -------- --- --- ---------- ----------- ---------
3 00-01-02-03-04-05 Running 100ms:1s 75
2 00-01-02-03-04-05 Success 1s:10s
1 00-01-02-03-04-05 Failed
DGS-3620-28PC:admin#
15-38 show cfm lm
Description
This command is used to show the frame loss measurement information.
: Enabled
: 0
: 0
: 0
Period:
Status Interval PCT Pri FD nanosec FDV nanosec Start
10s:1min 75
7 0
50 7 1434343
1 0
266
0 2013-01-01
18:00:00
2232 2013-01-01
14:00:00
0 2013-01-01
12:00:00