D-Link xStack DGS-3620 Reference Manual page 679

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the quarantine server URL:
DGS-3620-28PC:admin#config jwac quarantine_server_url
http://10.90.90.88/authpage.html
Command: config jwac quarantine_server_url http://10.90.90.88/authpage.html
Success.
DGS-3620-28PC:admin#
53-13 config jwac redirect
Description
This command is used to configure redirect destination and delay time before an unauthenticated
host is redirected to the quarantine server or the JWAC login web page. The unit of delay time is
seconds. 0 means no delaying the redirect.
Format
config jwac redirect {destination [quarantine_server | jwac_login_page] | delay_time <sec 0-
10>}(1)
Parameters
destination - Specifies the destination which the unauthenticated host will be redirected to.
quarantine_server - Specifies the unauthenticated host will be redirected to the
quarantine_server.
jwac_login_page - Specifies the unauthenticated host will be redirected to the
jwac_login_page.
delay_time - Specifies the time interval after which the unauthenticated host will be redirected.
<sec 0-10> - Enter the time interval after which the unauthenticated host will be redirected.
The delay time must be between 0 and 10 seconds.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure JWAC redirect destination to JWAC login web page and a delay time of 5 seconds:
DGS-3620-28PC:admin#config jwac redirect destination jwac_login_page delay_time
5
Command: config jwac redirect_ destination jwac_login_page delay_time 5
Success.
674