6 Command Line Interface
DGS-1500-28> reboot
% Device will reboot, please wait a few minutes to re-login.
DGS-1500-28>
reset config
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To restore all of the Switch's parameters to their default values:
DGS-1500-28> reset config
% Device will reboot after reset configuration successfully.
DGS-1500-28>
show ipif
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display IP interface settings:
DGS-1500-28> show ipif
IP Setting Mode
Interface name
Interface VLAN Name
IP Address
Subnet Mask
Default Gateway
DGS-1500-28>
To reset the Switch to the factory default settings.
reset config
All configurations will be reset to the default settings.
None.
None.
To display the configuration of an IP interface on the Switch.
show ipif [<ipif_name>]
The s how ipif command displays the current IP address of the
switch.
<ipif_name> - Specify the name to be displayed.
None.
: Static
: System
: default
: 10.90.90.90
: 255.255.255.0
: 0.0.0.0
1
0
1
1
0
1
D-Link Web Smart Switch User Manual