5 Command Line Interface
DGS-1210-28> res et c onfig
% Device will reboot after reset configuration successfully.
DGS-1210-28>
show ipif
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display IP interface settings:
DGS-1210-28> s how ipif
IP Setting Mode
IP Address
Subnet Mask
Default Gateway
DHCPv6 Client State
IPv6 Global Unicast Address: 3ffe:501:ffff:100:100::1/64
DGS-1210-28>
show switch
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the switch information:
To display the configuration of an IP interface on the Switch.
s how ipif
The s how ipif c ommand displays the current IP address of the
switch.
None.
None.
: Static
: 10.90.90.90
: 255.0.0.0
: 0.0.0.0
: Disabled
To display information about the Switch.
s how s witc h
The s how s witc h c ommand displays the status of the switch.
None.
None.
90
D-Link Web Smart Switch User Manual