D-Link xStack DGS-3620 Reference Manual page 557

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
44-13 delete igmp_snooping static_group
Description
This command is used to delete an IGMP snooping static group on the switch. The deletion of an
IGMP snooping static group will not affect the IGMP snooping dynamic member ports for a group.
Format
delete igmp_snooping static_group [vlan <vlan_name 32> | vlanid <vlanid_list>] <ipaddr>
Parameters
vlan - Specifies the name of the VLAN on which the router port resides.
<vlan_name 32> - Enter the VLAN name. The maximum length is 32 characters.
vlanid - Specifies the VLAN ID list on which the router port resides.
<vlanid_list> - Enter the VLAN ID list.
<ipaddr> - Enter the multicast group IP address (for Layer 3 switch).
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete an IGMP snooping static group from the default VLAN, group 239.1.1.1:
DGS-3620-28PC:admin#delete igmp_snooping static_group vlan default 239.1.1.1
Command: delete igmp_snooping static_group vlan default 239.1.1.1
Success.
DGS-3620-28PC:admin#
44-14 show igmp_snooping static_group
Description
This command is used to display the IGMP snooping static multicast group.
Format
show igmp_snooping static_group {[vlan <vlan_name 32> | vlanid <vlanid_list>] <ipaddr>}
Parameters
vlan - Specifies the name of the VLAN on which the router port resides.
<vlan_name 32> - Enter the VLAN name. The maximum length is 32 characters.
vlanid - Specifies the VLAN ID list on which the router port resides.
<vlanid_list> - Enter the VLAN ID list.
<ipaddr> - Enter the multicast group IP address (for Layer 3 switch).
552