D-Link xStack DGS-3620 Reference Manual page 317

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin# debug ospf interface_state_change state enable
Command: debug ospf interface_state_change state enable
Success.
DGS-3620-28PC:admin#
To enable all OSPF LSA debug flags:
DGS-3620-28PC:admin# debug ospf lsa all state enable
Command: debug ospf lsa all state enable
Success.
DGS-3620-28PC:admin#
To enable all OSPF packet debug flags:
DGS-3620-28PC:admin# debug ospf packet all state enable
Command: debug ospf packet all state enable
Success.
DGS-3620-28PC:admin#
To enable OSPF retransmission debug flag:
DGS-3620-28PC:admin# debug ospf retransmission state enable
Command: debug ospf retransmission state enable
Success.
DGS-3620-28PC:admin#
To enable all OSPF SPF debug flags:
DGS-3620-28PC:admin# debug ospf spf all state enable
Command: debug ospf spf all state enable
Success.
DGS-3620-28PC:admin#
20-16 debug ospf clear counter
Description
This command is used to reset the OSPF statistic counters.
Format
debug ospf clear counter {packet | neighbor | spf}
312