D-Link xStack DGS-3620 Reference Manual page 370

Hide thumbs Also See for xStack DGS-3620:

Table of Contents

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide

To display debug information of JWAC:

DGS-3620-28PC:admin#debug show jwac auth_info

Command: debug show jwac auth_info

ACL Index Bitmap DB (jwac_db_acl_bmp):

Internal TCP Port Number (jwac_internal_port_bitmap):

Connection DB:

Current AUTH DB (_jwac_db_nodes):

Ports AUTH Info: (_jwac_db_nodes)

----- ------------------ -------- ---------- ----------- -----------

JWAC Web data (jwac_web_auth_result_list):

CTRL+C ESC q

20-81 debug show packet ports box_id

This command is used to show the packet statistics information of the SIO ports.

debug show packet ports box_id [<value 1-12> | all] {sio1 | sio2}

<value 1-12> - Enter the box ID used here. This value must be between 1 and 12.

all - Specifies that all the box IDs will be used.

sio1 - Specifies that the minimum of two SIO ports will be used. SIO1 is the first stacking port.

sio2 - Specifies that the maximum of two SIO ports will be used. SIO2 is the second stacking

Restrictions

Only Administrator-level users can issue this command.

last_bytes authing_cnt authed_cnt

Chapters

Table of Contents