Creating A User Account - Planet UMG-2000 User Manual

4.4 Creating a User Account

To create a new user account, click the "User" tab in the "User" screen. This screen allows
the administrator to create a new user profile with specified service privileges.
USER ACCOUNT:
This section lists all the available settings of the user profile:
User name: Specifies a user name. All user related IT services will be created based
on this name. It cannot be changed once set.
Full Name: Specifies the user's full name.
Password: Specifies the user's access password. This password will be applied to all
the user related services, too.
Confirm password: Confirms and verifies the entered user password.
Account Type: Specifies either a common user or admin user privilege. The user with
the admin privilege can access the GUI management pages to manage the
UMG-2000 except the storage service.
Account Status: Indicates whether the user account is in an active or suspended state.
Active: all user subscribed IT services can be optionally enabled. Suspended: all user
subscribed IT services are disabled.
Department: Indicates a proper group or department for the user. You can create a
new group or department by clicking the "Group" tab from the "User" screen.
User ID: Specifies a unique user identifier for the user. The default value is
recommended.
36