Chapter 5 Examples; Fxs Business - Planet VGW 10 Series User Manual

5.1 FXS business

Select "User Port Settings -> Advanced Business Setup" setting page, so you can jump to the
main configuration page.
Parameters
Select Port
Caller Display Restrict all
Call wait
No disturb
Call Hold mode
Callout Constraint
Ringback Media
Hotline mode
State Subscribe
Reg Subs User
Dialog Subs User
Message Tx
Message destination
4-/8-Port SIP Internet Telephony Gateway
Figure 5-1-1 Advanced business configuration
Select a port number or all ports to be configured.
It's default by "disable".
Between "Enable" and "Disable", you could choose one of them.
When you select enable, it means that called port is forbidden.
These four modes are Standard, Disable, SSCC and SIP INFO,
Default is "Standard".
For the purpose to control call out number's prefix (etc:
+8652-88888888, +8652 is number's prefix), you can filter it here.
VGW supports local ringback tones; if you need, you can enable
it.
Hotline mode is disabled by default.
Specify subscriber, not enabled by default.
Specify subscriber, default is empty.
Specify subscriber, default is empty.
Designate a message transmitting user, not enabled by default.
Default is empty.
Page 39
VGW-x10 Series

Chapter 5 Examples

Illustration