Utility Function; Utility Execution - Mitsubishi Electric GOT2000 Series User Manual

1. UTILITY FUNCTION

Utility is a function, which carries out connection of GOT and controller, screen display and operation method settings,
program/data control and self-check etc.
Refer to the following for the utility function list.
➠ 1.2 Utility Function List
1.1

Utility Execution

For utility execution, utility has to be displayed by installing BootOS and basic system application in the C drive (built in flash
memory).
There are following three types for the installing BootOS and basic system application methods.
1) GT Designer3→GOT
GT Designer3
2) GT Designer3 → Data storage → GOT
Writing system applications
GT Designer3
3) GOT → Data storage → GOT
GOT
*1 When installing the BootOS and basic system application, standard monitor OS has to be installed in GOT in advance.
Refer to the following for the installation which uses GT Designer3.
➠
GT Designer3 (GOT2000) Screen Design Manual
Refer to the following for the installation which uses GOT.
➠
7. INSTALLATION OF BOOTOS AND BASIC SYSTEM APPLICATION
Via a USB interface or
RS-232 interface or
*1
Ethernet interface
Installing BootOS or
basic system application
Installing BootOS or
basic system application
to a file
Install a data
*1
Data storage storage to
the GOT
Uploading system
application files
Install a data
*1
Data storage storage to
the GOT
• Install directly from GT Designer3
GOT
• When GOT is remote,
GOT
install using a data storage easily
• Install from the GOT to the GOT
GOT
using a data storage
1.1 Utility Execution
1
1 - 1