Changing From One Screen To Another - Mitsubishi Electric GOT-A900 Series Operating Manual

6. OPERATING THE VARIOUS LADDER MONITOR SCREENS

6.1.4 Changing from one screen to another

(*1)
Touch
This section describes the screen movements when executing the ladder monitor from
the status where the user-created monitor screen is displayed.
Start
User-created monitor screen
Touch (*1)
Utility screen
Touch Exit Touch LADDER MON.
Ladder monitor screen
(see Sec. 6.2)
/ End. Sea. Touch Menu
Ladder read screen
(see Sec 6.1.2)
*1 Touch the key where the touch switch
(expanded) function was set with the
graphics software, and start the system
monitor function.
When the Utility screen is displayed, touch
LADDER MON. to start the system monitor
function.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The system monitor function and special module
monitor function can also be started from the
Utility screen.
Touch PLCRD.
Touch Ladder
6 - 13
MELSEC
PLC read screen
(see Sec. 6.1.1)
GOT