Resolving XT Remote Control Unit Problems
Problem
Solution
Solution
Solution
Restoring Default User Settings
About this task
This procedure explains how to restore the default settings if necessary. You can do this from the
endpoint itself only.
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
Figure 65: Setting network preferences
2.
Set the Use IPv6 field to Yes.
3.
From the web interface only, select Save.
The XT Remote Control Unit does not function.
Replace the battery, as described in
page 26. When the XT Remote Control Unit's battery power is low, an icon appears in the
system menus letting you know that you should replace the battery:
•
Half-charged Battery
•
Low Battery
If the battery power is not low, configure the XT Remote Control Unit code on the XT Codec
Unit to the same number that it is set on the XT Remote Control Unit, as described in
an XT Remote Control Unit with a XT Codec Unit
If you still experience problems, reconfigure the XT Remote Control Unit code to be a
number between 01-04, inclusive.
Installing the Batteries of the XT Remote Control Unit
on page 43).
Troubleshooting the Scopia XT Server for IP Office | 106
on
Pairing