Performing Basic Configuration - Avaya RADVISION Scopia XT5000 Installation Manual

Before you begin
• Obtain a license key for the Scopia XT Server for IP Office as described in
XT Server for IP Office to Obtain a License Key
to extend Scopia XT Server for IP Office functionality, see
Extend System Functionality
• If configuring from the endpoint, you must first enable advanced configuration, as described in
Maintaining the XT Server Locally from the Endpoint
Procedure
1. Access the Scopia XT Server for IP Office's Main menu.
2. Select Configure > Advanced > Utilities > Licenses.
3. Enter the license key you received when registering the product. You can also enter license
4. Select Activate Licenses.

Performing Basic Configuration

Before you perform basic configuration for the XT Server, your system administrator should install and
activate your XT Server (for details, see the Quick Setup Guide for Scopia XT Server for IP Office, the
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
on page 48.
The Licenses screen appears, displaying the serial number (10-digit string) and user code.
The user code corresponds to the system MAC address. These fields are not editable.
Important:
The serial number is also printed on a label affixed at the back of the XT Codec Unit.
keys for optional features.
The license is automatically enabled.
on page 48 or, if you are enabling a license option
Installing and Enabling Licenses which
on page 45.
Figure 26: Activating a license
Registering the Scopia
Initial Configuration | 52