Avaya RADVISION Scopia XT5000 Installation Manual page 62

2. Configure parameters as described in
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
62.
Table 13: Configuring SIP-related parameters
Parameter
User
Authentication Name
Authentication Password
UDP/TCP Listening Port
Transport Outbound Call
Figure 33: Configuring SIP settings
Table 13: Configuring SIP-related parameters
Enter the extension number of the user, as
configured in IP Office.
When connecting over SIP, this name is displayed
on the monitors participating in the videoconference.
Enter the user's Name, as configured in IP Office.
Enter the user's Login Code, as configured in IP
Office.
Enter the same port number used by IP Office for
receiving inbound SIP calls. By default, port 5060 is
used.
Select UDP.
on page
Description
Initial Configuration | 62