Avaya RADVISION Scopia XT5000 Installation Manual page 22

2. Define how the XT Codec Unit assigns ports by selecting one of the following from Auto
3. If you selected No in the Auto detect list, you can modify the TCP or UDP base port in the
4. From the web interface only, select Save.
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
Figure 6: Configuring the TCP or UDP port range from the web interface
detect:
• No: The XT Codec Unit uses the range of dynamic ports indicated and allows you to
define the base port (default and recommended setting).
• Yes: The XT Codec Unit assigns ports randomly, and you cannot define the base port.
Ports field.
Important:
You can configure the base port to any value between 1024-65535. The number of ports is
calculated automatically by the system, depending on whether you have an MCU license
and its type.
Planning the Topology of the Scopia XT Server for IP Office
Deployment | 22