Avaya RADVISION Scopia XT5000 Installation Manual page 54

Procedure
1. The quick setup wizard automatically appears the first time you access the Scopia XT Server
2. The quick setup wizard guides you through these basic configuration tasks:
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
for IP Office, either by turning on the XT Codec Unit or logging in to the web interface.
If the quick setup wizard is not displayed automatically when you first turn on the XT Codec
Unit, select Configure > Quick Setup from the Main Menu.
Figure 27: Accessing the Quick Setup
•
Setting the System Name and Language
your country, and preferred language for the interface.
•
Adjusting the Image Position
Important:
This task is not available from the web interface. If you are configuring from the web
interface, perform this procedure from the endpoint.
•
Configuring Network Settings
allow you to place and receive calls.
•
Configuring Gatekeeper Settings
works in conjunction with a gatekeeper, configure gatekeeper-related settings.
This is typically not relevant for IP Office deployments. Configure only if you are using a
gatekeeper in your deployment.
on page 55: Define your system's name,
on page 56: Adjust your monitor's image if necessary.
on page 58: Define your system's network settings to
on page 60: If your Scopia XT Server for IP Office
Initial Configuration | 54