Avaya RADVISION Scopia XT5000 Installation Manual page 80

Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Maintaining the XT Server Locally from the Endpoint
Procedure
1. Access the network settings as follows:
2. Select Parameters under GLAN.
3. Set the field as described in
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
• From the XT Server web interface, select Administrator Settings > Networks.
• From the endpoint's main menu, select Configure > Advanced > Networks.
Figure 46: Configuring the GLAN parameters from the web interface
To avoid connectivity issues, match these settings to the equivalent settings in the network.
on page 45.
Table 21: Configuring network connectivity on page 81.
Initial Configuration | 80