Remotely Enabling The License From The Web Interface - Avaya RADVISION Scopia XT5000 Installation Manual

Table 11: Scopia XT Server for IP Office Software Options
Feature
Video resolution
Recording
Videoconferences
Scopia Control
This procedure details how to register your extended license purchase, to convert your new user code
and option key into an updated license key.
Procedure
1. Open the envelope that you obtained when you bought your license extension, or refer to the
2. Locate the option key in the letter. Locate the serial number on the XT Codec Unit or the user
3. From your computer's Internet browser, navigate to http://licensing.radvision.com/.
4. Complete the online registration form and enter the serial number or the user code and the
5. Write down the license key and keep it in a safe place for future use.
6. Use the license key to enable the software or the option you bought, as described in:

Remotely Enabling the License from the Web Interface

About this task
This procedure describes how to enable the software license of an XT Codec Unit remotely via the web
interface. You can also enable the license from the endpoint's interface, as described in
License from the Scopia XT Server for IP Office
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
Option/Reference
55111-00937 Full HD
(1080p)
55111-00933 USB
Recording License
55111-00917 Scopia Control Enables controlling the Scopia XT Server for
email you received after purchasing the license.
code you received with the purchase.
You can also retrieve the user code and serial number by selecting Configure > About from
the Main menu.
option key. The Web registration form returns a license key.
•
Remotely Enabling the License from the Web Interface
•
Enabling the License from the Scopia XT Server for IP Office
Description
Higher quality video at 1080p 60 fps instead
the default 720p 60fps.
You can record videoconferences and store
them to a connected USB storage device.
You cannot record videoconferences when
encryption is enabled. For more information,
see Enabling Encryption for Videoconferences
on page 97 or contact your administrator.
When recording a videoconference, you can
include up to 5 remote endpoints.
IP Office using the Scopia Control Application
(iPad).
on page 49
on page 51.
on page 51
Enabling the
Initial Configuration | 49