Avaya RADVISION Scopia XT5000 Installation Manual page 86

3. From the web interface only, select Save.
4. Select Gatekeeper under H.323.
5. Set the fields as described in
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
Table 24: Configuring H.323 settings
Field Name
H.323 Name
E.164
Refuse calls by IP
Address
Figure 50: Configuring the Gatekeeper settings from the web interface
Description
The H.323 name or ID (alias) used to register the unit with the
gatekeeper.
When connecting over H.323, this name is displayed on the
monitors participating in the videoconference (for example:
John-Smith, or 9th-Floor-Room, or NY-Office).
The E.164 number used to register the unit with the
gatekeeper.
Select Yes to allow only endpoints registered to the
gatekeeper to call your endpoint.
Table 25: Configuring the gatekeeper on page 87.
Initial Configuration | 86