Avaya RADVISION Scopia XT5000 Installation Manual page 44

2. Enter the numeric code in the Remote control code field. You can choose any value
3. From the web interface only, select Save.
4. On the XT Remote Control Unit, press the * and # keys simultaneously until the red led blinks
5. Using the keypad, type the number you just entered in the Remote control code field.
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
Figure 21: Setting the XT Remote Control Unit Code
between 1-99.
twice.
Figure 22: Setting the code on the XT Remote Control Unit
Important:
You must always use two digits for a code. For example, to set the code to "1", enter "01".
The code of the XT Remote Control Unit is changed and the Remote Control
the new Remote Control code appear at the top-right corner of the screen:
icon with
Initial Configuration | 44