Avaya RADVISION Scopia XT5000 Installation Manual page 70

Table 16: Setting the display name
Field
System Name Display Mode
System Name
System Name Unicode
Hostname
3. From the web interface only, select Save.
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
Select which name the system displays on the titlebar:
• Automatic: The system selects the name to display by checking how
the endpoint was registered, in the following order:
–
If the system is registered to a SIP registrar or proxy, the SIP
username is displayed.
–
If the system is registered to a Gatekeeper, the H.323 name is
displayed.
–
If the system is not registered at all, the System Name Unicode
is displayed.
• System Name Unicode: Select to display the contents of the System
Name Unicode field, which allows non-alphanumeric characters such
as Chinese or Japanese alphabets.
• SIP: Select to display the SIP username, used to register your system
to the SIP server. This is the same as the System Name, unless you
change it manually as described in
Office on page 61.
• H.323: Select to display the H.323 name, used to register your system
to the gatekeeper. This is the same as the System Name, unless you
change it manually as described in
for IP Office with a Gatekeeper
• System Name: Select to display the contents of the System Name
field, which supports only alphanumeric characters.
• Hostname: Select to display the contents of the system's Hostname
field. This is typically the same as the System Name, unless the
System Name includes characters that are not supported by the
hostname standard. Invalid characters are replaced by the - character.
This field displays the initial name you entered for the system during the
quick setup (as described in
page 55).
If you selected this option from the System Name Display Mode list, you
can modify the name you want to display in the titlebar (optional). You can
only enter alphanumeric characters.
If you selected this option from the System Name Display Mode list, you
can modify the name you want to display in the titlebar (optional). You can
enter non-alphanumeric characters, such as Chinese or Japanese letters.
You cannot modify the Hostname.
This field displays the name used to register the system to the network. You
may need the system's hostname, for example, if you are locating the device
from a list of hostnames on an SNMP agent discovery tool.
Typically, the Hostname is the same as the System Name, unless the
System Name includes characters that are not supported by the hostname
standard. Invalid characters are replaced by the - character.
Description
Registering the XT Server to IP
Registering the Scopia XT Server
on page 84.
Setting the System Name and Language on
Initial Configuration | 70