Avaya RADVISION Scopia XT5000 Installation Manual page 78

2. Set the Use IPv6 field to enable or disable IPv6 support.
3. From the web interface only, select Save.
4. Access the IP address settings, as follows:
5. Set the fields as described in
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
Figure 44: Enabling IPv6 mode
• From the endpoint, select either GLAN 1 or GLAN 2.
• From the web interface, select Addresses under GLAN 1 or GLAN 2.
Figure 45: Configuring IP addresses from the web interface
Table 20: Configuring IP addresses on page 79.
Initial Configuration | 78