Modifying The System's Name On The Titlebar - Avaya RADVISION Scopia XT5000 Installation Manual

Modifying the System's Name on the Titlebar

About this task
This procedure describes how to configure the endpoint to use an alternate system name, such as the
SIP username, on the titlebar
can also do this as part of the quick setup from the endpoint itself, as described in
Name and Language
The name displayed on the monitors participating in the videoconference (for example: John-Smith, or
9th-Floor-Room, or NY-Office) is based on the protocol of the call. If you are connecting over SIP, your
system's SIP username is used, while if you are connecting over H.323, your system's H.323 name is
used. For more information, see
Scopia XT Server for IP Office with a Gatekeeper
Procedure
1. Access the system name settings:
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
(Figure 38: Scopia XT Server for IP Office's titlebar
on page 55.
Registering the XT Server to IP Office
Figure 38: Scopia XT Server for IP Office's titlebar
• From the XT Server web interface, select Administrator Settings > System >
Location.
• From the endpoint's main menu, select Configure > Advanced > System > Location.
You need to enter the PIN required to access the Advanced settings. The default PIN
is 1234.
on page 61 and
on page 84.
on page 68). You
Setting the System
Registering the
Initial Configuration | 68