Using The Xt Remote Control Unit - Avaya RADVISION Scopia XT5000 Installation Manual

Procedure
1. Verify that the LED on the front panel of the XT Codec Unit is blinking.
2. Turn on the XT Codec Unit by pressing the
3. The system home page appears on the monitors, and you can configure the system and
4. Select one of the options using the arrow keys of the XT Remote Control Unit.

Using the XT Remote Control Unit

This section explains how to use the XT Remote Control Unit to navigate through the system menus,
and lists the function of each key.
To use the XT Remote Control Unit to manage the system, you must first connect a monitor, as
described in
from the web interface only (see
The XT Remote Control Unit has an improved design and increases usability to give you a smoother and
more efficient videoconferencing experience.
describes the functions of the XT Remote Control Unit.
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
check the status.
Important:
When you access the system for the first time only, the Quick Setup wizard is displayed
(for details, see Accessing the Quick Setup Procedure
Connecting a Monitor to the XT Server
Managing your XT Server from the Web Interface
Power key on the XT Remote Control Unit.
on page 53).
Figure 19: Main menu
on page 25. Otherwise, you can manage the system
Figure 20: The new XT Remote Control Unit
on page 28).
on page 41
Initial Configuration | 40