Avaya RADVISION Scopia XT5000 Installation Manual page 19

Table 6: Bidirectional Ports to Open on the XT Server
Port Range Protocol
69 TFTP (UDP) TFTP client or
80 HTTP (TCP) Web server
123 SNTP (UDP) SNTP client
161 SNMP
(UDP)
1719 H.225.0/
RAS (UDP)
1720 H.225.0/
Q.931 (TCP)
3230-3248 H.225.0/Q.9
31/ H.245/
SIP (TCP)
3230-3305 RTP and
RTCP
(UDP)
3338 XML
Commands
(TCP)
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
Destination Functionality
Enables sending and
server receiving files via TFTP
Enables you to remotely
perform management
tasks via the web user
interface, enables NAT
auto-discovery via HTTP
Gets the Internet UTC time Cannot get the
An SNMP Enables you to discover
manager station the system IP address via
SNMP
Any H.323 video Enables H.323 call
network device signaling to a gatekeeper;
H.323 endpoints can use
gatekeeper services.
Any H.323 video Enables H.323 call
network device signaling (Q.931)
Any H.323/SIP Enables H.323 call control
video network signaling (Q.931), media
device control signaling (H.245),
SIP (TCP) call signaling,
and BFCP signaling.
Ephemeral TCP ports are
used to connect
simultaneous H.323 and
SIP calls.
Any H.323 video Enables H.323 and SIP
network device media (audio, video,
H.224/data RTP) and
media control (RTCP).
Ephemeral UDP ports are
used to connect
simultaneous H.323 and
SIP media calls.
Scopia Control, Enables communication
Scopia XT with Scopia Control and
Desktop Server Scopia XT Desktop Server
by sending commands and
receiving responses
Result of Blocking
Port
Cannot send or
receive files via
TFTP
In: Cannot access
the web server
Out: Cannot
access the web
server and NAT
auto-discovery via
HTTP does not
function
Internet UTC time
Cannot discover
the IP address of
the system via
SNMP
H.323 endpoints
cannot use
gatekeeper
services
Cannot connect
H.323 calls
Cannot connect
SIP/H.323 calls
No media
exchanged in
H.323 or SIP calls
Cannot
communicate with
Scopia Control
application or and
Scopia XT Desktop
Server
Planning the Topology of the Scopia XT Server for IP Office
Required
Optional
Recommended
Recommended
Mandatory if using
SNMP manager
station
Optional
(mandatory if
using a
gatekeeper)
Mandatory
Mandatory
To configure, see
Configuring the
TCP or UDP Port
Range on the
Scopia XT Server
for IP Office on
page 21
Mandatory
To configure, see
Configuring the
TCP or UDP Port
Range on the
Scopia XT Server
for IP Office on
page 21
Optional
Deployment | 19