Table of Contents
Advertisement
INTUITY Messaging Solutions Release 5 Migration Procedures
Remote Subscribers
Number of Local and Remote Subscribers
Machine Names and Voice IDs
26
To check the remote subscribers:
1. Type di re machine name where machine is the name of one of
the remote machines and name is the name of a remote
subscriber, and press ENTER.
The system displays the Remote Subscriber screen.
2. Check that all of the data on the screen is correct. If any of the
data is incorrect, you may want to add the data manually or you
may need to rerun the data transfer.
3. Repeat Step 1 and Step 2 for four other remote subscribers.
4. Press F1 (Cancel) to return to the command line.
To check the number of local and remote subscribers:
1. Type li me fe da and press ENTER.
The system displays the Feature Daily Traffic screen.
2. Compare the number of subscribers in the SUBSCRIBERS,
Local: field with the number of local subscribers on the
print-out of the DEFINITY AUDIX Feature Daily Traffic screen.
3. Compare the number of remote subscribers in the
SUBSCRIBERS, Remote: field with the number of remote
subscribers on the print-out of the DEFINITY AUDIX Feature
Daily Traffic screen.
4. Press F1 (Cancel).
The system display the following message:
command successfully completed
The cursor returns to the command line.
1. Type list machines and press ENTER.
The system displays the List Machine screen.
2. Verify that the machine names match the machine names in the
DEFINITY AUDIX system.
585-313-118 Issue 4
June 2002
Advertisement
Table of Contents
