Remotely Setting Regional Information - Avaya RADVISION Scopia XT5000 Installation Manual

3. From the web interface only, select Save.

Remotely Setting Regional Information

About this task
You must configure the region-related settings: the country and language. You also need to configure
audio coding and video frequency, because your video network depends on the local infrastructure. The
system suggests the optimal values for audio coding and video frequency when you enter the country
value.
You may have set some of these fields in the Quick Setup procedure, since this is part of the basic
required settings (for details, see
these settings at any time from the endpoint or the web interface.
Procedure
1. Access the XT Server web interface, as described in
2. Select Administrator Settings > System > Location.
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
Table 18: Configuring time zone related settings
Field Name
Time zone list
Enable daylight time
Start (dd/mm)
Stop (dd/mm)
Accessing the Quick Setup Procedure
page 34.
Figure 41: Setting the time zone
Select the time zone to which the system belongs.
Set the daylight or summer time field to Yes or No
according to the current daylight-saving status of your
time zone.
Set the day and month to indicate when daylight
saving times start.
Set the day and month to indicate when daylight
saving times end.
Accessing XT Server Web Interface
Description
on page 53). You can modify
Initial Configuration | 74
on