Generating A Certificate Signing Request For Xt Server - Avaya RADVISION Scopia XT5000 Installation Manual

3. Perform
4. Perform
5. To encrypt the media (audio, video, presentation) of videoconferences using the SRTP protocol,
perform

Generating a Certificate Signing Request for XT Server

About this task
This section details how to generate a certificate signing request (CSR) for the XT Server, which must be
signed by a certificate authority (CA). This is done from the web interface only.
Once properly signed, the certificate would confirm the identity of the XT Server to other components in
the network, and can also facilitate encrypted communications with those components.
Important:
If you modify the XT Server's IP address, you must generate a new CSR.
To restore previously uploaded certificates, see
page 93. To delete the certificates, see
Important:
Using encryption is subject to local regulation. In some countries it is restricted or limited for usage.
For more information, consult your local reseller.
Before you begin
To secure SIP connections using TLS certificates, your system must have a static IP address, since the
system generates the certificate request using its IP address as the Common Name (CN). For more
information, see
Procedure
1. Access the XT Server web interface, as described in
2. Select Administrator Settings > Utilities > Certificates.
3. Enter your organization's details and your email.
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
Uploading XT Server Certificates
Enabling the TLS Connection in XT Server
Enabling Encryption for Videoconferences
Configuring IP Addresses
page 34.
on page 91.
on page 95 .
on page 97.
Backing Up and Restoring XT Server Certificates
Deleting XT Server Certificates
on page 77.
Accessing XT Server Web Interface
Securing your Scopia XT Server for IP Office | 89
on
on page 94.
on