Implementing External Api Control - Avaya RADVISION Scopia XT5000 Installation Manual

With the gateway approach less communication lines are needed. As all gateways do not connect at the
same time and not all calls are ISDN, many more endpoints can share the same ISDN connection and
gateway.
Before you begin
Enable Peer-to-Peer mode in the Scopia Gateway for ISDN. For more information, see the Scopia
Gateway documentation.
Procedure
1. Access the XT Server web interface, as described in
2. Select Administrator Settings > Protocols > ISDN.
3. Configure the IDSN settings as described below:
4. Select Save.

Implementing External API Control

You can control the XT Codec Unit using the Scopia XT Server for IP Office API (requires integration
with AMX, Creston, or Extron control devices). Contact Radvision customer support to receive the
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
page 34.
Figure 5: Enabling ISDN connectivity
Table 5: Supporting ISDN Connectivity
Field
Enable
Gateway IP Address
Accessing XT Server Web Interface
Description
Select Yes to allow this Scopia XT Server for IP Office to
quickly dial ISDN endpoints via the Scopia Gateway for
ISDN.
Enter the IP address of the Scopia Gateway for ISDN used
by your organization.
Planning the Topology of the Scopia XT Server for IP Office
on
Deployment | 17