Adjusting The Image Position - Avaya RADVISION Scopia XT5000 Installation Manual

3. Select the required country from the Country list. If performing this task from the endpoint
4. If you want to change the language of the system menus, select Language.
5. To adjust the image on your monitor, select Next and continue with

Adjusting the Image Position

About this task
If your monitor does not center the image correctly, perform this procedure. This can be done from the
endpoint itself only.
This is only relevant if you connected a monitor to your system, as described in
the XT Server
Before you begin
This procedure is performed as part of the Quick Setup Wizard, after
Language
Access the quick setup wizard from the endpoint, as described in
on page 53.
Procedure
1. Examine the image on the monitor to decide if you need to adjust the image position.
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
interface, use the arrow keys and press ok/menu.
The system menu and the Language field automatically change to the language used in the
selected country.
If performing this task from the endpoint interface, press ok/menu to display the list of
languages. Scroll to the preferred language and press ok/menu.
Position on page 56.
If performing the quick setup from the web interface, access the quick setup from the
endpoint to adjust the image. This can be done at any time.
on page 25.
on page 55.
The triangles in the top left corner and bottom right corner must be fully visible so that the
white border of the triangle is fully visible on all sides.
If the image is centered correctly, skip this procedure and select Next.
Adjusting the Image
Connecting a Monitor to
Setting the System Name and
Accessing the Quick Setup Procedure
Initial Configuration | 56