Setting Date And Time - Avaya RADVISION Scopia XT5000 Installation Manual

3. Enter your new 4 digit PIN code.
4. Save your changes as follows:

Setting Date and Time

About this task
You can set the date and time from either the endpoint or the web interface.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Maintaining the XT Server Locally from the Endpoint
Procedure
1. Access the date and time settings as follows:
2. Set the date and time, as described in
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
From the web interface only, re-enter your new PIN in the Confirm PIN Code field.
• From the endpoint, select Done.
• From the web interface, select Save.
Use this PIN the next time you are accessing advanced settings.
• From the XT Server web interface, select Administrator Settings > System > Date &
Time > General.
• From the endpoint's main menu, select Configure > Advanced > System > Date &
Time > General.
You need to enter the PIN required to access the Advanced settings. The default PIN
is 1234.
72.
Important:
If you configure set Internet time to Yes , you cannot modify the date and time fields.
Table 17: Configuring date and time settings
Field Name
Day Enter the date.
Month Enter the month.
Year Enter the year.
Hour Enter the hour.
Minutes Enter the minutes.
on page 45.
Table 17: Configuring date and time settings
Description
on page
Initial Configuration | 72