Avaya RADVISION Scopia XT5000 Installation Manual page 67

Remotely Setting the System Name and Language
About this task
This procedure describes how to set the name and language of the endpoint from the web interface. You
can also do this as part of the quick setup from the endpoint itself, as described in
Name and Language
You can also configure the endpoint to use alternate system name, such as the SIP username, on both
the titlebar and on the monitors participating in the videoconference call, as described in
System's Name on the Titlebar
Procedure
1. Access the name and language settings:
2. Enter the name of the XT Server in the System Name field.
3. Select the required language from the Language list.
4. From the web interface only, select Save.
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
on page 55.
on page 68.
• From the XT Server web interface, select Basic Settings > Preferences > General.
• From the endpoint's main menu, select Configure > General.
Figure 37: Basic Settings page
Setting the System
Modifying the
Initial Configuration | 67