Setting The System Name And Language - Avaya RADVISION Scopia XT5000 Installation Manual

Setting the System Name and Language

About this task
You can select the name of your XT Codec Unit, to be displayed on the monitors participating in the
videoconference call (for example: Hong-Kong, or 9th-Floor-Room, or NY-Office), and on the system's
titlebar.
There is also a unicode version of the system name for users who want the name displayed on the
titlebar to contain non-English characters. For more information, see
the Titlebar
You can also select the country in which the system is located and the language in which the system
menus are displayed.
After initial setup, you can modify these settings by selecting Configure > General from the Main menu,
or from the web interface as described in
66.
Before you begin
Access the quick setup wizard from the endpoint or web interface, as described in
Setup Procedure
Procedure
1. Enter the name of the XT Server in the System Name field. This name is also used for the
2. To include non-ANSII characters such as Chinese or Japanese on the system's titlebar, enter
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2
on page 68.
on page 53.
SIP username and the H.323 name, which can be manually changed.
If you perform this task from the endpoint interface, use the alphanumeric keys of the XT
Remote Control Unit (for more information, see
40).
Figure 28: Setting Country and Language
the name in the System Name Unicode field. This can be configured from the web interface
only.
For more information about modifying the name on the system's titlebar, see
System's Name on the Titlebar
Remotely Setting the System Name and Language
Using the XT Remote Control Unit
on page 68.
Modifying the System's Name on
on page
Accessing the Quick
on page
Modifying the
Initial Configuration | 55